Quantcast
Channel: Motorcycles Repair Manual Download and Reviews » Search Results » how to rebuild progressive 440 shock
Browsing latest articles
Browse All 10 View Live

Suzuki GSX1000R 465 SeriesSingle Shock Supplement

download 1. One set of the shouldered sleeves with O-rings should be installed in the shock eye. If not, insert sleeves with O-rings in the shock eye (see figure 1). 2. Mount the shock as you would...

View Article



Harley-Davidson XL 883 and 1200 MODELS SADDLEBAG SUPPORT KIT INSTALLATION...

download 1. 1994-99 models: Remove upper shock absorber nut, washer, shock cover and backing washer. Save nut and washer and discard shock cover and backing washer. 2000-03 models: Remove upper shock...

View Article

STROKE DOWNHILL MOUNTAIN BIKE SHOCK SPECIFICATIONS

download The shock has an adjustable rebound and standard Hi/low compression. The optional independent hi/ low compression adjuster has a low speed brass screw and a seperate blue high speed hex. The...

View Article

Honda ST 1300 Series Single Shock Supplement

download Check the orientation of the adjuster on the shock body – looking at the top of the shock, the hydraulic line port should be165 degrees (clockwise) from the nitrogen pressure valve (see figure...

View Article

BMW K-SERIES (INCLUDING PARALEVER) SHOCK MOUNTING INSTRUCTIONS

download 1. The shock mounts with the hose towards the rear of the machine, with the shock body at the top and the shaft pointing downward. 2. Take the inside half of the bushing set on the shock eye...

View Article


Vespa GTS Super Specification

download Gts super 300 ie Gts super 125 ie s 125cc s 50cc Gts 250 ie Gts 125cc LX 125cc LX 50cc 2 stroke Engine Single-cylinder, catalised, QUASAR 4 stroke, 4 valve electronic injection Single-cylinder...

View Article

HARLEY-DAVIDSON SOFTAIL MODELS STEALTH AIR SHOCK MOUNTING

download INSTALLATION 1. Remove the seat, inner fender, and ignition coil cover. Removing the rear wheel assembly is recommended for ease of installation, but not absolutely necessary. Remove the nut...

View Article

KTM Enduro Engineering Shock Spring Removal And Installation Instructions

download 1 Place motorcycle on a stand so that the rear wheel is off the ground. 2 Remove the upper shock bolt. (Figure 1) 3 Remove the lower shock bolt. (Figure 2) 4 Remove the shock from the...

View Article


HARLEY DAVIDSON LOW REAR SHOCK KIT INSTALLATION MANUAL

download See Figure 3 and Table 1. INSTALLATION Shock Absorbers Perform this installation when the engine is cool. Working on or near the exhaust system when the engine is hot could result in severe...

View Article


ATK 50MX INSTALLATION AND ADJUSTMENT TIPS

download PRELOAD ADJUSTMENT— On some Works shocks a threaded preload is standard. This allows the adjustment of the ride height of the motorcycle. The preload is changed by turning a threaded nut down...

View Article
Browsing latest articles
Browse All 10 View Live




Latest Images